ITALIA SERIES Leverset, Knobset, Eschutcheon, Deadbolt

Tubular Latch Set

APPLICATION

•  For residential and commercial interior doors with privacy, passage and dummy function

MATERIAL

• Stainless Steel Levers, Knobs and Rose

SPECIFICATIONS

• Door thickness: 1-3/8” (35) to 1-3/4” (44)
• Latch Backset: 2-3/8” (60) standard, 2-3/4” (70) optional
• Grade 2 Latch: CTG2 Adjustable 2-3/8” (60) and 2-3/4” (70) (optional)
• Handing: Most lever designs are non-handed, Handed designs are marked accordingly. Specify handing upon ordering
• Latch Faceplate: 1” x 2 ¼” (25 x 57) square corner
• Emergency Pin: Available as standard for privacy function
• Strike: FLS Full Lip Strike 1” x 2 ¼”, ¼” round corner (standard)
• TS T-Strike 1-1/8” x 2” square corner (standard)
• ASA478 US32D ANSI Strike 4-7/8” x 1-1/4” (optional)

Function: Non-Keyed

Tubular Entry Set

APPLICATION

• For residential and commercial exterior and interior doors with entrance, privacy, passage and dummy function

MATERIAL

• Stainless Steel Levers, Knobs and Escutcheons

SPECIFICATIONS

• Door thickness:1 9/16” (40) – 2 (50)
• Latch Backset: 2-3/8” (60) standard ; 2 ¾” (70) optional
• Handing: Field reversible for passage and privacy function
• Latch Faceplate: 1” x 2 ¼” (25 x 57) square corner
• Strike: FLS Full Lip Strike 1” x 2 ¼”, ¼” round corner (standard)
• TS T-Strike 1-1/8” x 2” square corner (standard)
• ASA478 US32D ANSI Strike 4-7/8” x 1 ¼” (optional)

Entrance Function

Cylinder and Keys: Schlage C Keyway ; Cylinder 5-pin with 2 keys ; Keying service available

• Deadbolt: Latch Bolt: Grade 1, 4-way Drive-In, Brass bolt ; Adjustable 2-3/8” (60) and 2 ¾” (70)
• Deadbolt Strike: 1-1/8” x 2 ¾” (29 x 70) square corner standard

Privacy Function

• Emergency Pin: Available as standard for privacy function

Grade 2 Latch Upgrade

• Available for Entrance, Privacy and Passage functions of lever / knob

NM Series Mortise Lock

• For Doors – 1 ¼”
• Backset – 2 ¾”
• Lockcase – Heavy gauge zinc chromate steel
• Front – Heavy gauge steel 8” x 1 ¼” x 3/32”.  Accommodates flat doors and doors beveled 1/8” in 2”
• Armored Front – Wrought brass attached by machine screws to lock case front
• Deadbolt – 1” throw, brass chrome-plated with hardened steel rollers
• Guard-bolt – Extruded brass, chrome plated
• Stop-works – Rocker type, brass, chrome-plated
• Strikes – Brass, non-handed curve strike 4-7/8” x ¼”. Curved-up strike available upon request
• Handing – Handed. Easily field-reversible
• Trim – See Lever / Knob Designs, Giro / Quadro Rose
• Cylinder……………. As specified
• Keyway…………….. As specified
• Finishes……………. As specified
• UL Listing – UL Listed “A” Label (3 hours), for use on fire doors, single or pair of doors. “F” mark stamped on strike
• ANSI – Lock body conforms to Federal specification Type 86; and to all dimensional and operational performances of ANSI A156.13, Series 1000 Grade 1, exceeds 1,000,000 cycles

Model Number Reference

Deadbolts

APPLICATION

• For residential and commercial exterior and interior doors

MATERIAL

• Stainless Steel

SPECIFICATIONS

• Latch Bolt: Grade 1, 4-way Drive-In, Brass, Satin Nickel bolt
• Latch Backset: Adjustable 2-3/8? (60) and 2 ¾ (70)
• Handing: Non-Handed
• Latch Faceplate: 1” x 2 ¼” (25 x 57)
• Deadbolt Strike: 1-1/8” x 2 ¾” (29 x 70) square corner (standard)
• Security Strike: 1-1/8” x 2 ¾” x 3/32” (29 x 70 x 2) (standard)
• Cylinder and Keys: Schlage C Keyway, Cylinder 5-pin with 2 keys