SC8465 SE Cal-Royal Mortise Lock Heavy Duty Grade 1 Closet/ Storeroom w/DB

SC8453 SE Cal-Royal Mortise Lock Heavy Duty Grade 1 Entrance 

• Latch bolt retracted by knob or lever from either side. Deadbolt extended or retracted by key outside.  
• Can retrofit Schlage L9000 Series mortise lock without drilling any additional holes on the door for sectional and escutcheon trims. escutcheon trims.  
• Meets Buy America Act  
• Lifetime Warranty  

Cal-Royal SC Series Information  

Specifications 

•  Finish: 26D  
• Door Thickness: 1 ¾ (44.5mm) thick standard. For doors over 1 ¾ (44.5mm), specify door thickness  
• Handing: Lock bodies are easily field reversible, no need to specify hand when ordering  
• Backset: 2 ¾ (70mm) only backset.  
• Strike: Brass or stainless steel strike; ANSI Standard A115.1; curve lip with dust box  
• Lock Case: Heavy Duty wrought steel, zinc dichromate plated 
• C to C: Center of lever to center of cylinder is 3 7/8 (98mm)  
• Armor Faceplate: Brass or stainless steel; 8 x 1 7/32 (203mm x 31.3mm); ANSI Standard A115.1  
• Deadbolt: 1 (25.4mm) throw; hardened stainless steel  
• Latchbolt: 3/4 (19mm) throw; one-piece stainless steel with anti-friction reversible tongue  

Cylinders and Keyways  

• 6-pin solid brass C keyway standard. Optional: Schlage E, Schlage C-K,  
• Russwin D1-2-3-4, Corbin 59/60, Corbin-Russwin L4, Sargent LA-LB-LC,  
• Falcon/Weiser E, Arrow A, Yale 8, Yale GA and Kwikset. Can also accept  
• Medeco, Assa, Kaba and Cal-Royal HSK High Security Cylinders  
•  

Interchangeable Cores (IC) 

•  Interchangeable Core locks will accept compatible 6 or 7 pin cores with BEST,  
• FALCON and ARROW. Also available with SCHLAGE, large format cylinders  
• Toggle Button: High rust-resistant chrome plated zinc alloy  
• Master Keying: Can be master-keyed or grand master-keyed, construction keying available  
• Auxiliary Latch: Stainless Steel, non-handed  Certifications:  
• ANSI/BHMA Meets ANSI/BHMA A158.13 Series 1000 Grade 1 requirements.  
• UL / cUL UL and UL Listed to Canadian safety standard for A label (3-hour fire door); stamped letter F and UL symbol on armor faceplate 
•  POSITIVE PRESSURE Meets positive pressure requirements UL 10C and UBC 7-2 (1997)  
• ADA APPROVED Meets ADA requirements, specifically designed for Barrier Free Application